Contains information about the context of a rendering operation. More...

#include <qgsrendercontext.h>

Inheritance diagram for QgsRenderContext:

Public Member Functions
	QgsRenderContext ()

	QgsRenderContext (const QgsRenderContext &rh)

	~QgsRenderContext () override

void	addSymbolLayerClipGeometry (const QString &symbolLayerId, const QgsGeometry &geometry)
	Add a clip geometry to be applied to the symbolLayer before rendering.

Q_DECL_DEPRECATED void	addSymbolLayerClipPath (const QString &symbolLayerId, QPainterPath path)
	Add a clip path to be applied to the symbolLayer before rendering.

void	clearCustomProperty (const QString &property)
	Clears the specified custom rendering property.

Q_DECL_DEPRECATED void	clearCustomRenderingFlag (const QString &flag)
	Clears the specified custom rendering flag.

QList< QgsMapClippingRegion >	clippingRegions () const
	Returns the list of clipping regions to apply during the render.

double	convertFromMapUnits (double sizeInMapUnits, Qgis::RenderUnit outputUnit) const
	Converts a size from map units to the specified units.

double	convertFromPainterUnits (double size, Qgis::RenderUnit unit) const
	Converts a size from painter units (pixels) to the specified render unit.

double	convertMetersToMapUnits (double meters) const
	Convert meter distances to active MapUnit values for QgsUnitTypes::RenderMetersInMapUnits.

double	convertToMapUnits (double size, Qgis::RenderUnit unit, const QgsMapUnitScale &scale=QgsMapUnitScale()) const
	Converts a size from the specified units to map units.

double	convertToPainterUnits (double size, Qgis::RenderUnit unit, const QgsMapUnitScale &scale=QgsMapUnitScale(), Qgis::RenderSubcomponentProperty property=Qgis::RenderSubcomponentProperty::Generic) const
	Converts a size from the specified units to painter units (pixels).

QgsCoordinateTransform	coordinateTransform () const
	Returns the current coordinate transform for the context.

long long	currentFrame () const
	Returns the current frame number of the map (in frames per second), for maps which are part of an animation.

int	currentMaskId () const
	Returns the current mask id, which can be used with maskPainter()

QVariantMap	customProperties () const
	Returns custom rendering properties.

Q_DECL_DEPRECATED QVariantMap	customRenderingFlags () const
	Gets custom rendering flags.

QSize	deviceOutputSize () const
	Returns the device output size of the render.

float	devicePixelRatio () const
	Returns the device pixel ratio.

Q_DECL_DEPRECATED QSet< const QgsSymbolLayer * >	disabledSymbolLayers () const
	When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

QSet< QString >	disabledSymbolLayersV2 () const
	When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

const QgsDistanceArea &	distanceArea () const
	A general purpose distance and area calculator, capable of performing ellipsoid based calculations.

double	dpiTarget () const
	Returns the targeted DPI for rendering.

bool	drawEditingInformation () const
	Returns `true` if edit markers should be drawn during the render operation.

QgsElevationMap *	elevationMap () const
	Returns the destination elevation map for the render operation.

QgsExpressionContext &	expressionContext ()
	Gets the expression context.

const QgsExpressionContext &	expressionContext () const
	Gets the expression context (const version).

const QgsRectangle &	extent () const
	When rendering a map layer, calling this method returns the "clipping" extent for the layer (in the layer's CRS).

QgsGeometry	featureClipGeometry () const
	Returns the geometry to use to clip features at render time.

const QgsFeatureFilterProvider *	featureFilterProvider () const
	Gets the filter feature provider used for additional filtering of rendered features.

QgsFeedback *	feedback () const
	Returns the feedback object that can be queried regularly during rendering to check if rendering should be canceled, if set.

Qgis::RenderContextFlags	flags () const
	Returns combination of flags used for rendering.

bool	forceVectorOutput () const
	Returns `true` if rendering operations should use vector operations instead of any faster raster shortcuts.

double	frameRate () const
	Returns the frame rate of the map, for maps which are part of an animation.

const QgsAbstractGeometry *	geometry () const
	Returns pointer to the unsegmentized geometry.

bool	hasRenderedFeatureHandlers () const
	Returns `true` if the context has any rendered feature handlers.

QImage::Format	imageFormat () const
	Returns the QImage format which should be used for QImages created during rendering.

bool	isGuiPreview () const
	Returns the Gui preview mode.

bool	isSymbolLayerEnabled (const QgsSymbolLayer *layer) const
	When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

QgsLabelingEngine *	labelingEngine () const
	Gets access to new labeling engine (may be `nullptr`).

QgsLabelSink *	labelSink () const
	Returns the associated label sink, or `nullptr` if not set.

QgsRectangle	mapExtent () const
	Returns the original extent of the map being rendered.

const QgsMapToPixel &	mapToPixel () const
	Returns the context's map to pixel transform, which transforms between map coordinates and device coordinates.

const QgsMaskIdProvider *	maskIdProvider () const
	Returns the mask id provider attached to the context.

QPainter *	maskPainter (int id=0)
	Returns a mask QPainter for the render operation.

QgsMaskRenderSettings &	maskSettings ()
	Returns a reference to the mask render settings, which control how masks are drawn and behave during render operations.

const QgsMaskRenderSettings &	maskSettings () const
	Returns a reference to the mask render settings, which control how masks are drawn and behave during render operations.

QgsRenderContext &	operator= (const QgsRenderContext &rh)

QSize	outputSize () const
	Returns the size of the resulting rendered image, in pixels.

QPainter *	painter ()
	Returns the destination QPainter for the render operation.

const QPainter *	painter () const
	Returns the const destination QPainter for the render operation.

const QgsPathResolver &	pathResolver () const
	Returns the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

QPainter *	previewRenderPainter ()
	Returns the const destination QPainter for temporary in-progress preview renders.

const QPainter *	previewRenderPainter () const
	Returns the const destination QPainter for temporary in-progress preview renders.

QList< QgsRenderedFeatureHandlerInterface * >	renderedFeatureHandlers () const
	Returns the list of rendered feature handlers to use while rendering map layers.

double	rendererScale () const
	Returns the renderer map scale.

Qgis::RendererUsage	rendererUsage () const
	Returns the renderer usage.

bool	renderingStopped () const
	Returns `true` if the rendering operation has been stopped and any ongoing rendering should be canceled immediately.

double	scaleFactor () const
	Returns the scaling factor for the render to convert painter units to physical sizes.

double	segmentationTolerance () const
	Gets the segmentation tolerance applied when rendering curved geometries.

QgsAbstractGeometry::SegmentationToleranceType	segmentationToleranceType () const
	Gets segmentation tolerance type (maximum angle or maximum difference between curve and approximation)

QColor	selectionColor () const
	Returns the color to use when rendering selected features.

void	setCoordinateTransform (const QgsCoordinateTransform &t)
	Sets the current coordinate transform for the context.

void	setCurrentFrame (long long frame)
	Sets the current frame of the map, for maps which are part of an animation.

void	setCurrentMaskId (int id)
	Stores a mask id as the "current" one.

void	setCustomProperty (const QString &property, const QVariant &value)
	Sets a custom rendering property.

Q_DECL_DEPRECATED void	setCustomRenderingFlag (const QString &flag, const QVariant &value)
	Sets a custom rendering flag.

void	setDevicePixelRatio (float ratio)
	Sets the device pixel ratio.

Q_DECL_DEPRECATED void	setDisabledSymbolLayers (const QSet< const QgsSymbolLayer * > &symbolLayers)
	When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

void	setDisabledSymbolLayersV2 (const QSet< QString > &symbolLayers)
	When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

void	setDistanceArea (const QgsDistanceArea &distanceArea)
	A general purpose distance and area calculator, capable of performing ellipsoid based calculations.

void	setDpiTarget (double dpi)
	Sets the targeted dpi for rendering.

void	setDrawEditingInformation (bool b)
	Sets whether edit markers should be drawn during the render operation.

void	setElevationMap (QgsElevationMap *map)
	Sets the destination elevation map for the render operation.

void	setExpressionContext (const QgsExpressionContext &context)
	Sets the expression context.

void	setExtent (const QgsRectangle &extent)
	When rendering a map layer, calling this method sets the "clipping" extent for the layer (in the layer's CRS).

void	setFeatureClipGeometry (const QgsGeometry &geometry)
	Sets a geometry to use to clip features at render time.

void	setFeatureFilterProvider (const QgsFeatureFilterProvider *ffp)
	Set a filter feature provider used for additional filtering of rendered features.

void	setFeedback (QgsFeedback *feedback)
	Attach a feedback object that can be queried regularly during rendering to check if rendering should be canceled.

void	setFlag (Qgis::RenderContextFlag flag, bool on=true)
	Enable or disable a particular flag (other flags are not affected)

void	setFlags (Qgis::RenderContextFlags flags)
	Set combination of flags that will be used for rendering.

void	setForceVectorOutput (bool force)
	Sets whether rendering operations should use vector operations instead of any faster raster shortcuts.

void	setFrameRate (double rate)
	Sets the frame rate of the map (in frames per second), for maps which are part of an animation.

void	setGeometry (const QgsAbstractGeometry *geometry)
	Sets pointer to original (unsegmentized) geometry.

void	setImageFormat (QImage::Format format)
	Sets QImage format which should be used for QImages created during rendering.

void	setIsGuiPreview (bool preview)
	Sets GUI preview mode.

void	setLabelingEngine (QgsLabelingEngine *engine)
	Assigns the labeling engine.

void	setLabelSink (QgsLabelSink *sink)
	Assigns the label sink which will take over responsibility for handling labels.

void	setMapExtent (const QgsRectangle &extent)
	Sets the original extent of the map being rendered.

void	setMapToPixel (const QgsMapToPixel &mtp)
	Sets the context's map to pixel transform, which transforms between map coordinates and device coordinates.

void	setMaskIdProvider (QgsMaskIdProvider *provider)
	Attaches a mask id provider to the context.

void	setMaskPainter (QPainter *p, int id=0)
	Sets a mask QPainter for the render operation.

void	setMaskSettings (const QgsMaskRenderSettings &settings)
	Sets the mask render settings, which control how masks are drawn and behave during render operations.

void	setOutputSize (QSize size)
	Sets the size of the resulting rendered image, in pixels.

void	setPainter (QPainter *p)
	Sets the destination QPainter for the render operation.

void	setPainterFlagsUsingContext (QPainter *painter=nullptr) const
	Sets relevant flags on a destination painter, using the flags and settings currently defined for the render context.

void	setPathResolver (const QgsPathResolver &resolver)
	Sets the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

void	setPreviewRenderPainter (QPainter *painter)
	Sets the destination painter for temporary in-progress preview renders.

void	setRendererScale (double scale)
	Sets the renderer map scale.

void	setRendererUsage (Qgis::RendererUsage usage)
	Sets the renderer usage.

void	setRenderingStopped (bool stopped)
	Sets whether the rendering operation has been stopped and any ongoing rendering should be canceled immediately.

void	setScaleFactor (double factor)
	Sets the scaling factor for the render to convert painter units to physical sizes.

void	setSegmentationTolerance (double tolerance)
	Sets the segmentation tolerance applied when rendering curved geometries.

void	setSegmentationToleranceType (QgsAbstractGeometry::SegmentationToleranceType type)
	Sets segmentation tolerance type (maximum angle or maximum difference between curve and approximation)

void	setSelectionColor (const QColor &color)
	Sets the color to use when rendering selected features.

void	setShowSelection (bool showSelection)
	Sets whether vector selections should be shown in the rendered map.

void	setSymbologyReferenceScale (double scale)
	Sets the symbology reference scale.

void	setTextRenderFormat (Qgis::TextRenderFormat format)
	Sets the text render format, which dictates how text is rendered (e.g.

void	setTextureOrigin (const QPointF &origin)
	Sets the texture origin, which should be used as a brush transform when rendering using QBrush objects.

void	setTransformContext (const QgsCoordinateTransformContext &context)
	Sets the context's coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

void	setUseAdvancedEffects (bool enabled)
	Used to enable or disable advanced effects such as blend modes.

void	setUseRenderingOptimization (bool enabled)
	Sets whether the rendering optimization (geometry simplification) should be executed.

void	setVectorSimplifyMethod (const QgsVectorSimplifyMethod &simplifyMethod)
	Sets the simplification setting to use when rendering vector layers.

void	setZRange (const QgsDoubleRange &range)
	Sets the range of z-values which should be rendered.

bool	showSelection () const
	Returns `true` if vector selections should be shown in the rendered map.

QVector< QgsGeometry >	symbolLayerClipGeometries (const QString &symbolLayerId) const
	Returns clipping geometries to be applied to the symbolLayer before rendering.

Q_DECL_DEPRECATED QList< QPainterPath >	symbolLayerClipPaths (const QString &symbolLayerId) const
	Returns clip paths to be applied to the symbolLayer before rendering.

bool	symbolLayerHasClipGeometries (const QString &symbolLayerId) const
	Returns `true` if the symbol layer with matching ID has any associated clip geometries.

double	symbologyReferenceScale () const
	Returns the symbology reference scale.

bool	testFlag (Qgis::RenderContextFlag flag) const
	Check whether a particular flag is enabled.

Qgis::TextRenderFormat	textRenderFormat () const
	Returns the text render format, which dictates how text is rendered (e.g.

QPointF	textureOrigin () const
	Returns the texture origin, which should be used as a brush transform when rendering using QBrush objects.

QgsCoordinateTransformContext	transformContext () const
	Returns the context's coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

bool	useAdvancedEffects () const
	Returns `true` if advanced effects such as blend modes such be used.

bool	useRenderingOptimization () const
	Returns `true` if the rendering optimization (geometry simplification) can be executed.

QgsVectorSimplifyMethod &	vectorSimplifyMethod ()
	Returns the simplification settings to use when rendering vector layers.

const QgsVectorSimplifyMethod &	vectorSimplifyMethod () const
	Returns the simplification settings to use when rendering vector layers.

QgsDoubleRange	zRange () const
	Returns the range of z-values which should be rendered.

Public Member Functions inherited from QgsTemporalRangeObject
	QgsTemporalRangeObject (bool enabled=false)
	Constructor QgsTemporalRangeObject.

virtual	~QgsTemporalRangeObject ()=default

bool	isTemporal () const
	Returns `true` if the object's temporal range is enabled, and the object will be filtered when rendering maps with a specific time range set.

void	setIsTemporal (bool enabled)
	Sets whether the temporal range is enabled (i.e.

void	setTemporalRange (const QgsDateTimeRange &range)
	Sets the temporal range for the object.

const QgsDateTimeRange &	temporalRange () const
	Returns the datetime range for the object.

Static Public Member Functions
static QgsRenderContext	fromMapSettings (const QgsMapSettings &mapSettings)
	create initialized QgsRenderContext instance from given QgsMapSettings

static QgsRenderContext	fromQPainter (QPainter *painter)
	Creates a default render context given a pixel based QPainter destination.

Detailed Description

Contains information about the context of a rendering operation.

The context of a rendering operation defines properties such as the conversion ratio between screen and map units, the extents to be rendered etc.

Definition at line 61 of file qgsrendercontext.h.

Constructor & Destructor Documentation

◆ QgsRenderContext() [1/2]

QgsRenderContext::QgsRenderContext ( )

Definition at line 32 of file qgsrendercontext.cpp.

◆ ~QgsRenderContext()

QgsRenderContext::~QgsRenderContext ( )

overridedefault

◆ QgsRenderContext() [2/2]

QgsRenderContext::QgsRenderContext ( const QgsRenderContext & rh )

Definition at line 43 of file qgsrendercontext.cpp.

Member Function Documentation

◆ addSymbolLayerClipGeometry()

void QgsRenderContext::addSymbolLayerClipGeometry	(	const QString &	symbolLayerId,
		const QgsGeometry &	geometry
	)

Add a clip geometry to be applied to the symbolLayer before rendering.

See also: symbolLayerClipGeometries()

Since: QGIS 3.38

Definition at line 870 of file qgsrendercontext.cpp.

◆ addSymbolLayerClipPath()

void QgsRenderContext::addSymbolLayerClipPath	(	const QString &	symbolLayerId,
		QPainterPath	path
	)

Add a clip path to be applied to the symbolLayer before rendering.

See also: addSymbolLayerClipGeometry()

Deprecated:: QGIS 3.38. Use addSymbolLayerClipGeometry() instead.

Definition at line 851 of file qgsrendercontext.cpp.

◆ clearCustomProperty()

void QgsRenderContext::clearCustomProperty ( const QString & property )

inline

Clears the specified custom rendering property.

See also: setCustomProperty()

Since: QGIS 3.40

Definition at line 923 of file qgsrendercontext.h.

◆ clearCustomRenderingFlag()

Q_DECL_DEPRECATED void QgsRenderContext::clearCustomRenderingFlag ( const QString & flag )

inline

Clears the specified custom rendering flag.

Parameters

flag	the flag name

See also: setCustomRenderingFlag()

Deprecated:: QGIS 3.40. Use clearCustomProperty() instead.

Definition at line 915 of file qgsrendercontext.h.

◆ clippingRegions()

QList< QgsMapClippingRegion > QgsRenderContext::clippingRegions ( ) const

Returns the list of clipping regions to apply during the render.

These regions are always in the final destination CRS for the map.

Since: QGIS 3.16

Definition at line 756 of file qgsrendercontext.cpp.

◆ convertFromMapUnits()

double QgsRenderContext::convertFromMapUnits	(	double	sizeInMapUnits,
		Qgis::RenderUnit	outputUnit
	)		const

Converts a size from map units to the specified units.

See also: convertToMapUnits()

Definition at line 623 of file qgsrendercontext.cpp.

◆ convertFromPainterUnits()

double QgsRenderContext::convertFromPainterUnits	(	double	size,
		Qgis::RenderUnit	unit
	)		const

Converts a size from painter units (pixels) to the specified render unit.

See also: convertToPainterUnits(); convertToMapUnits()

Since: QGIS 3.40

Definition at line 495 of file qgsrendercontext.cpp.

◆ convertMetersToMapUnits()

double QgsRenderContext::convertMetersToMapUnits ( double meters ) const

Convert meter distances to active MapUnit values for QgsUnitTypes::RenderMetersInMapUnits.

Note: When the sourceCrs() is geographic, the center of the Extent will be used

Definition at line 663 of file qgsrendercontext.cpp.

◆ convertToMapUnits()

double QgsRenderContext::convertToMapUnits	(	double	size,
		Qgis::RenderUnit	unit,
		const QgsMapUnitScale &	scale = `QgsMapUnitScale()`
	)		const

Converts a size from the specified units to map units.

The conversion respects the limits specified by the optional scale parameter.

See also: convertToPainterUnits()

Definition at line 557 of file qgsrendercontext.cpp.

◆ convertToPainterUnits()

double QgsRenderContext::convertToPainterUnits	(	double	size,
		Qgis::RenderUnit	unit,
		const QgsMapUnitScale &	scale = `QgsMapUnitScale()`,
		Qgis::RenderSubcomponentProperty	property = `Qgis::RenderSubcomponentProperty::Generic`
	)		const

Converts a size from the specified units to painter units (pixels).

The conversion respects the limits specified by the optional scale parameter.

Since QGIS 3.22 the optional property argument can be used to specify the associated property. This is used in some contexts to refine the converted size. For example, a Qgis::RenderSubcomponentProperty::BlurSize property will be limited to a suitably fast range when the render context has the Qgis::RenderContextFlag::RenderSymbolPreview set.

See also: convertFromPainterUnits(); convertToMapUnits()

Definition at line 387 of file qgsrendercontext.cpp.

◆ coordinateTransform()

QgsCoordinateTransform QgsRenderContext::coordinateTransform ( ) const

inline

Returns the current coordinate transform for the context.

This represents the coordinate transform required to transform a layer which is being rendered back to the CRS of the rendered map. If no coordinate transformation is required, or the render context is not associated with a map layer render, then an invalid coordinate transformation is returned.

See also: setCoordinateTransform()

Definition at line 234 of file qgsrendercontext.h.

◆ currentFrame()

long long QgsRenderContext::currentFrame ( ) const

Returns the current frame number of the map (in frames per second), for maps which are part of an animation.

Returns -1 if the map is not associated with an animation.

See also: setCurrentFrame()

Since: QGIS 3.26

Definition at line 831 of file qgsrendercontext.cpp.

◆ currentMaskId()

int QgsRenderContext::currentMaskId ( ) const

inline

Returns the current mask id, which can be used with maskPainter()

See also: setCurrentMaskId(); maskPainter()

Since: QGIS 3.12

Definition at line 847 of file qgsrendercontext.h.

◆ customProperties()

QVariantMap QgsRenderContext::customProperties ( ) const

inline

Returns custom rendering properties.

Objects might honour these to alter their rendering.

See also: setCustomProperty()

Since: QGIS 3.40

Definition at line 888 of file qgsrendercontext.h.

◆ customRenderingFlags()

Q_DECL_DEPRECATED QVariantMap QgsRenderContext::customRenderingFlags ( ) const

inline

Gets custom rendering flags.

Layers might honour these to alter their rendering.

Returns: a map of custom flags

See also: setCustomRenderingFlag()

Deprecated:: QGIS 3.40. Use customProperties() instead.

Definition at line 878 of file qgsrendercontext.h.

◆ deviceOutputSize()

QSize QgsRenderContext::deviceOutputSize ( ) const

Returns the device output size of the render.

This is equivalent to the output size multiplicated by the device pixel ratio.

See also: outputSize(); devicePixelRatio(); setOutputSize()

Since: QGIS 3.22

Definition at line 816 of file qgsrendercontext.cpp.

◆ devicePixelRatio()

float QgsRenderContext::devicePixelRatio ( ) const

Returns the device pixel ratio.

Common values are 1 for normal-dpi displays and 2 for high-dpi "retina" displays.

See also: setDevicePixelRatio()

Since: QGIS 3.22

Definition at line 806 of file qgsrendercontext.cpp.

◆ disabledSymbolLayers()

QSet< const QgsSymbolLayer * > QgsRenderContext::disabledSymbolLayers ( ) const

When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

Returns the list of disabled symbol layers.

See also: setDisabledSymbolLayers(); isSymbolLayerEnabled()

Since: QGIS 3.12

Deprecated:: QGIS 3.30. And replaced with disabledSymbolLayersV2.

Definition at line 907 of file qgsrendercontext.cpp.

◆ disabledSymbolLayersV2()

QSet< QString > QgsRenderContext::disabledSymbolLayersV2 ( ) const

When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

Returns the list of disabled symbol layer ids.

See also: setDisabledSymbolLayers(); isSymbolLayerEnabled()

Since: QGIS 3.30

Definition at line 912 of file qgsrendercontext.cpp.

◆ distanceArea()

const QgsDistanceArea & QgsRenderContext::distanceArea ( ) const

inline

A general purpose distance and area calculator, capable of performing ellipsoid based calculations.

Definition at line 239 of file qgsrendercontext.h.

◆ dpiTarget()

double QgsRenderContext::dpiTarget ( ) const

inline

Returns the targeted DPI for rendering.

See also: setDpiTarget()

Since: QGIS 3.20

Definition at line 325 of file qgsrendercontext.h.

◆ drawEditingInformation()

bool QgsRenderContext::drawEditingInformation ( ) const

Returns true if edit markers should be drawn during the render operation.

See also: setDrawEditingInformation()

Definition at line 330 of file qgsrendercontext.cpp.

◆ elevationMap()

QgsElevationMap * QgsRenderContext::elevationMap ( ) const

Returns the destination elevation map for the render operation.

See also: setElevationMap()

Since: QGIS 3.30

Definition at line 841 of file qgsrendercontext.cpp.

◆ expressionContext() [1/2]

QgsExpressionContext & QgsRenderContext::expressionContext ( )

inline

Gets the expression context.

This context should be used for all expression evaluation associated with this render context.

See also: setExpressionContext()

Definition at line 681 of file qgsrendercontext.h.

◆ expressionContext() [2/2]

const QgsExpressionContext & QgsRenderContext::expressionContext ( ) const

inline

Gets the expression context (const version).

This context should be used for all expression evaluation associated with this render context.

See also: setExpressionContext()

Note: not available in Python bindings

Definition at line 689 of file qgsrendercontext.h.

◆ extent()

const QgsRectangle & QgsRenderContext::extent ( ) const

inline

When rendering a map layer, calling this method returns the "clipping" extent for the layer (in the layer's CRS).

This extent is a "worst-case" scenario, which is guaranteed to cover the complete visible portion of the layer when it is rendered to a map. It is often larger than the actual visible portion of that layer.

Warning: For some layers, depending on the visible extent and the coordinate transforms involved, this extent will represent the entire globe. This method should never be used to determine the actual visible extent of a map render.

See also: setExtent(); mapExtent()

Definition at line 290 of file qgsrendercontext.h.

◆ featureClipGeometry()

QgsGeometry QgsRenderContext::featureClipGeometry ( ) const

Returns the geometry to use to clip features at render time.

When vector features are rendered, they should be clipped to this geometry.

Warning: The clipping must take effect for rendering the feature's symbol only, and should never be applied directly to the feature being rendered. Doing so would impact the results of rendering rules which rely on feature geometry, such as a rule-based renderer using the feature's area.

See also: setFeatureClipGeometry()

Since: QGIS 3.16

Definition at line 761 of file qgsrendercontext.cpp.

◆ featureFilterProvider()

const QgsFeatureFilterProvider * QgsRenderContext::featureFilterProvider ( ) const

Gets the filter feature provider used for additional filtering of rendered features.

Returns: the filter feature provider

See also: setFeatureFilterProvider()

Definition at line 382 of file qgsrendercontext.cpp.

◆ feedback()

QgsFeedback * QgsRenderContext::feedback ( ) const

Returns the feedback object that can be queried regularly during rendering to check if rendering should be canceled, if set.

Maybe be nullptr.

See also: setFeedback()

Since: QGIS 3.22

Definition at line 218 of file qgsrendercontext.cpp.

◆ flags()

Qgis::RenderContextFlags QgsRenderContext::flags ( ) const

Returns combination of flags used for rendering.

Definition at line 236 of file qgsrendercontext.cpp.

◆ forceVectorOutput()

bool QgsRenderContext::forceVectorOutput ( ) const

Returns true if rendering operations should use vector operations instead of any faster raster shortcuts.

See also: setForceVectorOutput()

Definition at line 315 of file qgsrendercontext.cpp.

◆ frameRate()

double QgsRenderContext::frameRate ( ) const

Returns the frame rate of the map, for maps which are part of an animation.

Returns -1 if the map is not associated with an animation.

See also: setFrameRate()

Since: QGIS 3.26

Definition at line 821 of file qgsrendercontext.cpp.

◆ fromMapSettings()

QgsRenderContext QgsRenderContext::fromMapSettings ( const QgsMapSettings & mapSettings )

static

create initialized QgsRenderContext instance from given QgsMapSettings

Definition at line 246 of file qgsrendercontext.cpp.

◆ fromQPainter()

QgsRenderContext QgsRenderContext::fromQPainter ( QPainter * painter )

static

Creates a default render context given a pixel based QPainter destination.

If no painter is specified or the painter has no device, then a default DPI of 88 will be assumed.

Definition at line 160 of file qgsrendercontext.cpp.

◆ geometry()

const QgsAbstractGeometry * QgsRenderContext::geometry ( ) const

inline

Returns pointer to the unsegmentized geometry.

Definition at line 692 of file qgsrendercontext.h.

◆ hasRenderedFeatureHandlers()

bool QgsRenderContext::hasRenderedFeatureHandlers ( ) const

inline

Returns true if the context has any rendered feature handlers.

See also: renderedFeatureHandlers()

Since: QGIS 3.10

Definition at line 815 of file qgsrendercontext.h.

◆ imageFormat()

QImage::Format QgsRenderContext::imageFormat ( ) const

inline

Returns the QImage format which should be used for QImages created during rendering.

See also: setImageFormat

Since: QGIS 3.22

Definition at line 1130 of file qgsrendercontext.h.

◆ isGuiPreview()

bool QgsRenderContext::isGuiPreview ( ) const

inline

Returns the Gui preview mode.

GUI preview mode is used to change the behavior of some renderings when they are done to preview of symbology in the GUI. This is especially used to display mask symbol layers rather than painting them in a mask painter, which is not meant to be visible, by definition.

See also: isGuiPreview; setIsGuiPreview

Since: QGIS 3.12

Definition at line 870 of file qgsrendercontext.h.

◆ isSymbolLayerEnabled()

bool QgsRenderContext::isSymbolLayerEnabled ( const QgsSymbolLayer * layer ) const

When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

Checks whether a given symbol layer has been disabled for the current pass.

See also: setDisabledSymbolLayers(); disabledSymbolLayers()

Since: QGIS 3.12

Definition at line 917 of file qgsrendercontext.cpp.

◆ labelingEngine()

QgsLabelingEngine * QgsRenderContext::labelingEngine ( ) const

inline

Gets access to new labeling engine (may be nullptr).

Note: Not available in Python bindings.

Definition at line 419 of file qgsrendercontext.h.

◆ labelSink()

QgsLabelSink * QgsRenderContext::labelSink ( ) const

inline

Returns the associated label sink, or nullptr if not set.

Note: Not available in Python bindings.

Since: QGIS 3.24

Definition at line 426 of file qgsrendercontext.h.

◆ mapExtent()

QgsRectangle QgsRenderContext::mapExtent ( ) const

inline

Returns the original extent of the map being rendered.

Unlike extent(), this extent is always in the final destination CRS for the map render and represents the exact bounds of the map being rendered.

See also: extent(); setMapExtent()

Since: QGIS 3.4.8

Definition at line 302 of file qgsrendercontext.h.

◆ mapToPixel()

const QgsMapToPixel & QgsRenderContext::mapToPixel ( ) const

inline

Returns the context's map to pixel transform, which transforms between map coordinates and device coordinates.

See also: setMapToPixel()

Definition at line 309 of file qgsrendercontext.h.

◆ maskIdProvider()

const QgsMaskIdProvider * QgsRenderContext::maskIdProvider ( ) const

inline

Returns the mask id provider attached to the context.

See also: setMaskIdProvider()

Since: QGIS 3.12

Definition at line 832 of file qgsrendercontext.h.

◆ maskPainter()

QPainter * QgsRenderContext::maskPainter ( int id = 0 )

inline

Returns a mask QPainter for the render operation.

Multiple mask painters can be defined, each with a unique identifier. nullptr is returned if a mask painter with the given identifier does not exist. This is currently used to implement selective masking.

See also: setMaskPainter(); currentMaskId()

Since: QGIS 3.12

Definition at line 163 of file qgsrendercontext.h.

◆ maskSettings() [1/2]

QgsMaskRenderSettings & QgsRenderContext::maskSettings ( )

inline

Returns a reference to the mask render settings, which control how masks are drawn and behave during render operations.

See also: setMaskSettings()

Since: QGIS 3.38

Definition at line 995 of file qgsrendercontext.h.

◆ maskSettings() [2/2]

const QgsMaskRenderSettings & QgsRenderContext::maskSettings ( ) const

inline

Returns a reference to the mask render settings, which control how masks are drawn and behave during render operations.

See also: setMaskSettings()

Since: QGIS 3.38

Definition at line 986 of file qgsrendercontext.h.

◆ operator=()

QgsRenderContext & QgsRenderContext::operator= ( const QgsRenderContext & rh )

Definition at line 101 of file qgsrendercontext.cpp.

◆ outputSize()

QSize QgsRenderContext::outputSize ( ) const

Returns the size of the resulting rendered image, in pixels.

See also: deviceOutputSize(); setOutputSize()

Since: QGIS 3.22

Definition at line 796 of file qgsrendercontext.cpp.

◆ painter() [1/2]

QPainter * QgsRenderContext::painter ( )

inline

Returns the destination QPainter for the render operation.

See also: setPainter()

Definition at line 108 of file qgsrendercontext.h.

◆ painter() [2/2]

const QPainter * QgsRenderContext::painter ( ) const

inline

Returns the const destination QPainter for the render operation.

See also: setPainter()

Since: QGIS 3.12

Definition at line 117 of file qgsrendercontext.h.

◆ pathResolver()

const QgsPathResolver & QgsRenderContext::pathResolver ( ) const

inline

Returns the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

for resolving relative symbol paths.

See also: setPathResolver()

Definition at line 265 of file qgsrendercontext.h.

◆ previewRenderPainter() [1/2]

QPainter * QgsRenderContext::previewRenderPainter ( )

inline

Returns the const destination QPainter for temporary in-progress preview renders.

May be nullptr if temporary in-progress preview renders are not required.

See also: setPreviewRenderPainter()

Since: QGIS 3.34

Definition at line 128 of file qgsrendercontext.h.

◆ previewRenderPainter() [2/2]

const QPainter * QgsRenderContext::previewRenderPainter ( ) const

inline

Returns the const destination QPainter for temporary in-progress preview renders.

May be nullptr if temporary in-progress preview renders are not required.

See also: setPreviewRenderPainter()

Since: QGIS 3.34

Definition at line 140 of file qgsrendercontext.h.

◆ renderedFeatureHandlers()

QList< QgsRenderedFeatureHandlerInterface * > QgsRenderContext::renderedFeatureHandlers ( ) const

Returns the list of rendered feature handlers to use while rendering map layers.

See also: hasRenderedFeatureHandlers()

Since: QGIS 3.10

Definition at line 751 of file qgsrendercontext.cpp.

◆ rendererScale()

double QgsRenderContext::rendererScale ( ) const

inline

Returns the renderer map scale.

This will match the desired scale denominator for the rendered map, eg 1000.0 for a 1:1000 map render.

See also: setRendererScale()

Definition at line 395 of file qgsrendercontext.h.

◆ rendererUsage()

Qgis::RendererUsage QgsRenderContext::rendererUsage ( ) const

inline

Returns the renderer usage.

See also: setRendererUsage()

Since: QGIS 3.24

Definition at line 1138 of file qgsrendercontext.h.

◆ renderingStopped()

bool QgsRenderContext::renderingStopped ( ) const

inline

Returns true if the rendering operation has been stopped and any ongoing rendering should be canceled immediately.

Note: Since QGIS 3.22 the feedback() member exists as an alternative means of cancellation support.

See also: setRenderingStopped(); feedback()

Definition at line 336 of file qgsrendercontext.h.

◆ scaleFactor()

double QgsRenderContext::scaleFactor ( ) const

inline

Returns the scaling factor for the render to convert painter units to physical sizes.

This is usually equal to the number of pixels per millimeter.

See also: setScaleFactor()

Definition at line 317 of file qgsrendercontext.h.

◆ segmentationTolerance()

double QgsRenderContext::segmentationTolerance ( ) const

inline

Gets the segmentation tolerance applied when rendering curved geometries.

See also: setSegmentationTolerance()

Definition at line 722 of file qgsrendercontext.h.

◆ segmentationToleranceType()

QgsAbstractGeometry::SegmentationToleranceType QgsRenderContext::segmentationToleranceType ( ) const

inline

Gets segmentation tolerance type (maximum angle or maximum difference between curve and approximation)

See also: setSegmentationToleranceType()

Definition at line 736 of file qgsrendercontext.h.

◆ selectionColor()

QColor QgsRenderContext::selectionColor ( ) const

inline

Returns the color to use when rendering selected features.

See also: setSelectionColor()

Definition at line 433 of file qgsrendercontext.h.

◆ setCoordinateTransform()

void QgsRenderContext::setCoordinateTransform ( const QgsCoordinateTransform & t )

Sets the current coordinate transform for the context.

This represents the coordinate transform required to transform the layer which is being rendered back to the CRS of the rendered map.

Set to an invalid QgsCoordinateTransform to indicate that no transformation is required.

See also: coordinateTransform()

Definition at line 340 of file qgsrendercontext.cpp.

◆ setCurrentFrame()

void QgsRenderContext::setCurrentFrame ( long long frame )

Sets the current frame of the map, for maps which are part of an animation.

Defaults to -1 if the map is not associated with an animation.

See also: currentFrame()

Since: QGIS 3.26

Definition at line 836 of file qgsrendercontext.cpp.

◆ setCurrentMaskId()

void QgsRenderContext::setCurrentMaskId ( int id )

inline

Stores a mask id as the "current" one.

See also: currentMaskId()

Since: QGIS 3.12

Definition at line 839 of file qgsrendercontext.h.

◆ setCustomProperty()

void QgsRenderContext::setCustomProperty	(	const QString &	property,
		const QVariant &	value
	)

inline

Sets a custom rendering property.

Objects might honour these to alter their rendering.

See also: customProperties()

Since: QGIS 3.40

Definition at line 907 of file qgsrendercontext.h.

◆ setCustomRenderingFlag()

Q_DECL_DEPRECATED void QgsRenderContext::setCustomRenderingFlag	(	const QString &	flag,
		const QVariant &	value
	)

inline

Sets a custom rendering flag.

Layers might honour these to alter their rendering.

Parameters

flag	the flag name
value	the flag value

See also: customRenderingFlags()

Deprecated:: QGIS 3.40. Use setCustomProperty() instead.

Definition at line 897 of file qgsrendercontext.h.

◆ setDevicePixelRatio()

void QgsRenderContext::setDevicePixelRatio ( float ratio )

Sets the device pixel ratio.

Common values are 1 for normal-dpi displays and 2 for high-dpi "retina" displays.

See also: devicePixelRatio()

Since: QGIS 3.22

Definition at line 811 of file qgsrendercontext.cpp.

◆ setDisabledSymbolLayers()

void QgsRenderContext::setDisabledSymbolLayers ( const QSet< const QgsSymbolLayer * > & symbolLayers )

When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

Sets the list of disabled symbol layers.

See also: disabledSymbolLayers(); isSymbolLayerEnabled()

Since: QGIS 3.12

Deprecated:: QGIS 3.30. And replaced with setDisabledSymbolLayersV2.

Definition at line 895 of file qgsrendercontext.cpp.

◆ setDisabledSymbolLayersV2()

void QgsRenderContext::setDisabledSymbolLayersV2 ( const QSet< QString > & symbolLayers )

When rendering a map layer in a second pass (for selective masking), some symbol layers may be disabled.

Sets the list of disabled symbol layer ids.

See also: disabledSymbolLayersV2(); isSymbolLayerEnabled()

Since: QGIS 3.30

Definition at line 902 of file qgsrendercontext.cpp.

◆ setDistanceArea()

void QgsRenderContext::setDistanceArea ( const QgsDistanceArea & distanceArea )

inline

A general purpose distance and area calculator, capable of performing ellipsoid based calculations.

Will be used to convert meter distances to active MapUnit values for QgsUnitTypes::RenderMetersInMapUnits

Definition at line 514 of file qgsrendercontext.h.

◆ setDpiTarget()

void QgsRenderContext::setDpiTarget ( double dpi )

inline

Sets the targeted dpi for rendering.

See also: dpiTarget()

Since: QGIS 3.20

Definition at line 530 of file qgsrendercontext.h.

◆ setDrawEditingInformation()

void QgsRenderContext::setDrawEditingInformation ( bool b )

Sets whether edit markers should be drawn during the render operation.

See also: drawEditingInformation()

Definition at line 345 of file qgsrendercontext.cpp.

◆ setElevationMap()

void QgsRenderContext::setElevationMap ( QgsElevationMap * map )

Sets the destination elevation map for the render operation.

Ownership of the elevation map is not transferred and the QgsElevationMap destination must stay alive for the duration of any rendering operations.

See also: elevationMap()

Since: QGIS 3.30

Definition at line 846 of file qgsrendercontext.cpp.

◆ setExpressionContext()

void QgsRenderContext::setExpressionContext ( const QgsExpressionContext & context )

inline

Sets the expression context.

This context is used for all expression evaluation associated with this render context.

See also: expressionContext()

Definition at line 674 of file qgsrendercontext.h.

◆ setExtent()

void QgsRenderContext::setExtent ( const QgsRectangle & extent )

inline

When rendering a map layer, calling this method sets the "clipping" extent for the layer (in the layer's CRS).

This extent should be a "worst-case" scenario, which is guaranteed to completely cover the entire visible portion of the layer when it is rendered to the map. It may be larger than the actual visible area, but MUST contain at least the entire visible area.

See also: setExtent(); setMapExtent()

Definition at line 477 of file qgsrendercontext.h.

◆ setFeatureClipGeometry()

void QgsRenderContext::setFeatureClipGeometry ( const QgsGeometry & geometry )

Sets a geometry to use to clip features at render time.

Note: This is not usually set directly, but rather specified by calling QgsMapSettings:addClippingRegion() prior to constructing a QgsRenderContext.

See also: featureClipGeometry()

Since: QGIS 3.16

Definition at line 766 of file qgsrendercontext.cpp.

◆ setFeatureFilterProvider()

void QgsRenderContext::setFeatureFilterProvider ( const QgsFeatureFilterProvider * ffp )

Set a filter feature provider used for additional filtering of rendered features.

Parameters

ffp	the filter feature provider

See also: featureFilterProvider()

Definition at line 370 of file qgsrendercontext.cpp.

◆ setFeedback()

void QgsRenderContext::setFeedback ( QgsFeedback * feedback )

Attach a feedback object that can be queried regularly during rendering to check if rendering should be canceled.

Ownership of feedback is NOT transferred, and the caller must take care that it exists for the lifetime of the render context.

See also: feedback()

Since: QGIS 3.22

Definition at line 213 of file qgsrendercontext.cpp.

◆ setFlag()

void QgsRenderContext::setFlag	(	Qgis::RenderContextFlag	flag,
		bool	on = `true`
	)

Enable or disable a particular flag (other flags are not affected)

Definition at line 228 of file qgsrendercontext.cpp.

◆ setFlags()

void QgsRenderContext::setFlags ( Qgis::RenderContextFlags flags )

Set combination of flags that will be used for rendering.

Definition at line 223 of file qgsrendercontext.cpp.

◆ setForceVectorOutput()

void QgsRenderContext::setForceVectorOutput ( bool force )

Sets whether rendering operations should use vector operations instead of any faster raster shortcuts.

See also: forceVectorOutput()

Definition at line 350 of file qgsrendercontext.cpp.

◆ setFrameRate()

void QgsRenderContext::setFrameRate ( double rate )

Sets the frame rate of the map (in frames per second), for maps which are part of an animation.

Defaults to -1 if the map is not associated with an animation.

See also: frameRate()

Since: QGIS 3.26

Definition at line 826 of file qgsrendercontext.cpp.

◆ setGeometry()

void QgsRenderContext::setGeometry ( const QgsAbstractGeometry * geometry )

inline

Sets pointer to original (unsegmentized) geometry.

Definition at line 694 of file qgsrendercontext.h.

◆ setImageFormat()

void QgsRenderContext::setImageFormat ( QImage::Format format )

inline

Sets QImage format which should be used for QImages created during rendering.

See also: imageFormat()

Since: QGIS 3.22

Definition at line 1121 of file qgsrendercontext.h.

◆ setIsGuiPreview()

void QgsRenderContext::setIsGuiPreview ( bool preview )

inline

Sets GUI preview mode.

GUI preview mode is used to change the behavior of some renderings when they are done to preview of symbology in the GUI. This is especially used to display mask symbol layers rather than painting them in a mask painter, which is not meant to be visible, by definition.

See also: isGuiPreview

Since: QGIS 3.12

Definition at line 858 of file qgsrendercontext.h.

◆ setLabelingEngine()

void QgsRenderContext::setLabelingEngine ( QgsLabelingEngine * engine )

inline

Assigns the labeling engine.

Note: Not available in Python bindings.

Definition at line 597 of file qgsrendercontext.h.

◆ setLabelSink()

void QgsRenderContext::setLabelSink ( QgsLabelSink * sink )

inline

Assigns the label sink which will take over responsibility for handling labels.

Note: Ownership is not transferred and the sink must exist for the lifetime of the map rendering job.; Not available in Python bindings.

Since: QGIS 3.24

Definition at line 605 of file qgsrendercontext.h.

◆ setMapExtent()

void QgsRenderContext::setMapExtent ( const QgsRectangle & extent )

inline

Sets the original extent of the map being rendered.

Unlike setExtent(), this extent is always in the final destination CRS for the map render and represents the exact bounds of the map being rendered.

See also: mapExtent(); setExtent()

Since: QGIS 3.4.8

Definition at line 489 of file qgsrendercontext.h.

◆ setMapToPixel()

void QgsRenderContext::setMapToPixel ( const QgsMapToPixel & mtp )

inline

Sets the context's map to pixel transform, which transforms between map coordinates and device coordinates.

See also: mapToPixel()

Definition at line 463 of file qgsrendercontext.h.

◆ setMaskIdProvider()

void QgsRenderContext::setMaskIdProvider ( QgsMaskIdProvider * provider )

inline

Attaches a mask id provider to the context.

It will allow some rendering operations to set the current mask id based on the context (label layer names and label rules for instance).

See also: QgsMaskIdProvider; setCurrentMaskId(); maskIdProvider()

Since: QGIS 3.12

Definition at line 825 of file qgsrendercontext.h.

◆ setMaskPainter()

void QgsRenderContext::setMaskPainter	(	QPainter *	p,
		int	id = `0`
	)

inline

Sets a mask QPainter for the render operation.

Ownership of the painter is not transferred and the QPainter must stay alive for the duration of any rendering operations. Multiple mask painters can be defined and the second parameter gives a unique identifier to each one.

See also: maskPainter()

Definition at line 583 of file qgsrendercontext.h.

◆ setMaskSettings()

void QgsRenderContext::setMaskSettings ( const QgsMaskRenderSettings & settings )

Sets the mask render settings, which control how masks are drawn and behave during render operations.

See also: maskSettings()

Since: QGIS 3.38

Definition at line 781 of file qgsrendercontext.cpp.

◆ setOutputSize()

void QgsRenderContext::setOutputSize ( QSize size )

Sets the size of the resulting rendered image, in pixels.

See also: outputSize()

Since: QGIS 3.22

Definition at line 801 of file qgsrendercontext.cpp.

◆ setPainter()

void QgsRenderContext::setPainter ( QPainter * p )

inline

Sets the destination QPainter for the render operation.

Ownership of the painter is not transferred and the QPainter destination must stay alive for the duration of any rendering operations.

See also: painter()

Definition at line 562 of file qgsrendercontext.h.

◆ setPainterFlagsUsingContext()

void QgsRenderContext::setPainterFlagsUsingContext ( QPainter * painter = nullptr ) const

Sets relevant flags on a destination painter, using the flags and settings currently defined for the render context.

If no painter is specified, then the flags will be applied to the render context's painter().

Since: QGIS 3.16

Definition at line 183 of file qgsrendercontext.cpp.

◆ setPathResolver()

void QgsRenderContext::setPathResolver ( const QgsPathResolver & resolver )

inline

Sets the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

for resolving relative symbol paths.

See also: pathResolver()

Definition at line 273 of file qgsrendercontext.h.

◆ setPreviewRenderPainter()

void QgsRenderContext::setPreviewRenderPainter ( QPainter * painter )

inline

Sets the destination painter for temporary in-progress preview renders.

Ownership of painter is not transferred and the QPainter destination must stay alive for the duration of any rendering operations.

painter may be nullptr if temporary in-progress preview renders are not required.

See also: previewRenderPainter()

Since: QGIS 3.34

Definition at line 574 of file qgsrendercontext.h.

◆ setRendererScale()

void QgsRenderContext::setRendererScale ( double scale )

inline

Sets the renderer map scale.

This should match the desired scale denominator for the rendered map, eg 1000.0 for a 1:1000 map render.

See also: rendererScale()

Definition at line 537 of file qgsrendercontext.h.

◆ setRendererUsage()

void QgsRenderContext::setRendererUsage ( Qgis::RendererUsage usage )

inline

Sets the renderer usage.

Note: This usage not alter how the map gets rendered but the intention is that data provider knows the context of rendering and may report that to the backend.

See also: rendererUsage()

Since: QGIS 3.24

Definition at line 1149 of file qgsrendercontext.h.

◆ setRenderingStopped()

void QgsRenderContext::setRenderingStopped ( bool stopped )

inline

Sets whether the rendering operation has been stopped and any ongoing rendering should be canceled immediately.

Note: Since QGIS 3.22 the feedback() member exists as an alternative means of cancellation support.

See also: renderingStopped(); feedback(); setFeedback()

Definition at line 508 of file qgsrendercontext.h.

◆ setScaleFactor()

void QgsRenderContext::setScaleFactor ( double factor )

inline

Sets the scaling factor for the render to convert painter units to physical sizes.

This should usually be equal to the number of pixels per millimeter.

See also: scaleFactor()

Definition at line 522 of file qgsrendercontext.h.

◆ setSegmentationTolerance()

void QgsRenderContext::setSegmentationTolerance ( double tolerance )

inline

Sets the segmentation tolerance applied when rendering curved geometries.

Parameters

tolerance the segmentation tolerance

See also: segmentationTolerance(); segmentationToleranceType()

Definition at line 716 of file qgsrendercontext.h.

◆ setSegmentationToleranceType()

void QgsRenderContext::setSegmentationToleranceType ( QgsAbstractGeometry::SegmentationToleranceType type )

inline

Sets segmentation tolerance type (maximum angle or maximum difference between curve and approximation)

Parameters

type	the segmentation tolerance typename

See also: segmentationToleranceType(); segmentationTolerance()

Definition at line 730 of file qgsrendercontext.h.

◆ setSelectionColor()

void QgsRenderContext::setSelectionColor ( const QColor & color )

inline

Sets the color to use when rendering selected features.

See also: selectionColor()

Definition at line 612 of file qgsrendercontext.h.

◆ setShowSelection()

void QgsRenderContext::setShowSelection ( bool showSelection )

Sets whether vector selections should be shown in the rendered map.

Parameters

showSelection set to true if selections should be shown

See also: showSelection; setSelectionColor

Since: QGIS v2.4

Definition at line 355 of file qgsrendercontext.cpp.

◆ setSymbologyReferenceScale()

void QgsRenderContext::setSymbologyReferenceScale ( double scale )

inline

Sets the symbology reference scale.

This should match the desired scale denominator for the rendered map, eg 1000.0 for a 1:1000 map render. Set to -1 to disable symbology scaling by reference scale.

The symbology reference scale is an optional property which specifies the reference scale at which symbology in paper units (such a millimeters or points) is fixed to. For instance, if scale is set to 1000 then a 2mm thick line will be rendered at exactly 2mm thick when a map is rendered at 1:1000, or 1mm thick when rendered at 1:2000, or 4mm thick at 1:500.

See also: symbologyReferenceScale(); rendererScale()

Since: QGIS 3.22

Definition at line 554 of file qgsrendercontext.h.

◆ setTextRenderFormat()

void QgsRenderContext::setTextRenderFormat ( Qgis::TextRenderFormat format )

inline

Sets the text render format, which dictates how text is rendered (e.g.

as paths or real text objects).

See also: textRenderFormat()

Since: QGIS 3.4.3

Definition at line 798 of file qgsrendercontext.h.

◆ setTextureOrigin()

void QgsRenderContext::setTextureOrigin ( const QPointF & origin )

Sets the texture origin, which should be used as a brush transform when rendering using QBrush objects.

See also: textureOrigin()

Since: QGIS 3.16

Definition at line 776 of file qgsrendercontext.cpp.

◆ setTransformContext()

void QgsRenderContext::setTransformContext ( const QgsCoordinateTransformContext & context )

Sets the context's coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

See also: transformContext()

Definition at line 205 of file qgsrendercontext.cpp.

◆ setUseAdvancedEffects()

void QgsRenderContext::setUseAdvancedEffects ( bool enabled )

Used to enable or disable advanced effects such as blend modes.

See also: useAdvancedEffects()

Definition at line 325 of file qgsrendercontext.cpp.

◆ setUseRenderingOptimization()

void QgsRenderContext::setUseRenderingOptimization ( bool enabled )

Sets whether the rendering optimization (geometry simplification) should be executed.

See also: useRenderingOptimization()

Definition at line 365 of file qgsrendercontext.cpp.

◆ setVectorSimplifyMethod()

void QgsRenderContext::setVectorSimplifyMethod ( const QgsVectorSimplifyMethod & simplifyMethod )

inline

Sets the simplification setting to use when rendering vector layers.

This can be used to specify simplification methods to apply during map exports and renders, e.g. to allow vector layers to be simplified to an appropriate maximum level of detail during PDF exports or to speed up layer rendering

The default is to use no simplification.

See also: vectorSimplifyMethod()

Definition at line 667 of file qgsrendercontext.h.

◆ setZRange()

void QgsRenderContext::setZRange ( const QgsDoubleRange & range )

Sets the range of z-values which should be rendered.

See also: zRange()

Since: QGIS 3.18

Definition at line 791 of file qgsrendercontext.cpp.

◆ showSelection()

bool QgsRenderContext::showSelection ( ) const

Returns true if vector selections should be shown in the rendered map.

Returns: true if selections should be shown

See also: setShowSelection; selectionColor

Since: QGIS v2.4

Definition at line 335 of file qgsrendercontext.cpp.

◆ symbolLayerClipGeometries()

QVector< QgsGeometry > QgsRenderContext::symbolLayerClipGeometries ( const QString & symbolLayerId ) const

Returns clipping geometries to be applied to the symbolLayer before rendering.

See also: symbolLayerHasClipGeometries(); addSymbolLayerClipGeometry()

Since: QGIS 3.38

Definition at line 890 of file qgsrendercontext.cpp.

◆ symbolLayerClipPaths()

QList< QPainterPath > QgsRenderContext::symbolLayerClipPaths ( const QString & symbolLayerId ) const

Returns clip paths to be applied to the symbolLayer before rendering.

See also: symbolLayerClipGeometries()

Deprecated:: QGIS 3.38. Use symbolLayerClipGeometries() instead.

Definition at line 858 of file qgsrendercontext.cpp.

◆ symbolLayerHasClipGeometries()

bool QgsRenderContext::symbolLayerHasClipGeometries ( const QString & symbolLayerId ) const

Returns true if the symbol layer with matching ID has any associated clip geometries.

See also: symbolLayerClipGeometries()

Since: QGIS 3.38

Definition at line 882 of file qgsrendercontext.cpp.

◆ symbologyReferenceScale()

double QgsRenderContext::symbologyReferenceScale ( ) const

inline

Returns the symbology reference scale.

This represents the desired scale denominator for the rendered map, eg 1000.0 for a 1:1000 map render. A value of -1 indicates that symbology scaling by reference scale is disabled.

The symbology reference scale is an optional property which specifies the reference scale at which symbology in paper units (such a millimeters or points) is fixed to. For instance, if the scale is 1000 then a 2mm thick line will be rendered at exactly 2mm thick when a map is rendered at 1:1000, or 1mm thick when rendered at 1:2000, or 4mm thick at 1:500.

See also: setSymbologyReferenceScale(); rendererScale()

Since: QGIS 3.22

Definition at line 413 of file qgsrendercontext.h.

◆ testFlag()

bool QgsRenderContext::testFlag ( Qgis::RenderContextFlag flag ) const

Check whether a particular flag is enabled.

Definition at line 241 of file qgsrendercontext.cpp.

◆ textRenderFormat()

Qgis::TextRenderFormat QgsRenderContext::textRenderFormat ( ) const

inline

Returns the text render format, which dictates how text is rendered (e.g.

as paths or real text objects).

See also: setTextRenderFormat()

Since: QGIS 3.4.3

Definition at line 787 of file qgsrendercontext.h.

◆ textureOrigin()

QPointF QgsRenderContext::textureOrigin ( ) const

Returns the texture origin, which should be used as a brush transform when rendering using QBrush objects.

See also: setTextureOrigin()

Since: QGIS 3.16

Definition at line 771 of file qgsrendercontext.cpp.

◆ transformContext()

QgsCoordinateTransformContext QgsRenderContext::transformContext ( ) const

Returns the context's coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

See also: setTransformContext()

Definition at line 196 of file qgsrendercontext.cpp.

◆ useAdvancedEffects()

bool QgsRenderContext::useAdvancedEffects ( ) const

Returns true if advanced effects such as blend modes such be used.

See also: setUseAdvancedEffects()

Definition at line 320 of file qgsrendercontext.cpp.

◆ useRenderingOptimization()

bool QgsRenderContext::useRenderingOptimization ( ) const

Returns true if the rendering optimization (geometry simplification) can be executed.

See also: setUseRenderingOptimization()

Definition at line 360 of file qgsrendercontext.cpp.

◆ vectorSimplifyMethod() [1/2]

QgsVectorSimplifyMethod & QgsRenderContext::vectorSimplifyMethod ( )

inline

Returns the simplification settings to use when rendering vector layers.

The default is to use no simplification.

See also: setVectorSimplifyMethod()

Definition at line 644 of file qgsrendercontext.h.

◆ vectorSimplifyMethod() [2/2]

const QgsVectorSimplifyMethod & QgsRenderContext::vectorSimplifyMethod ( ) const

inline

Returns the simplification settings to use when rendering vector layers.

The default is to use no simplification.

See also: setVectorSimplifyMethod()

Definition at line 653 of file qgsrendercontext.h.

◆ zRange()

QgsDoubleRange QgsRenderContext::zRange ( ) const

Returns the range of z-values which should be rendered.

See also: setZRange()

Since: QGIS 3.18

Definition at line 786 of file qgsrendercontext.cpp.

The documentation for this class was generated from the following files:

/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/core/qgsrendercontext.h
/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/core/qgsrendercontext.cpp

Public Member Functions

Static Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ QgsRenderContext() [1/2]

◆ ~QgsRenderContext()

◆ QgsRenderContext() [2/2]

Member Function Documentation

◆ addSymbolLayerClipGeometry()

◆ addSymbolLayerClipPath()

◆ clearCustomProperty()

◆ clearCustomRenderingFlag()

◆ clippingRegions()

◆ convertFromMapUnits()

◆ convertFromPainterUnits()

◆ convertMetersToMapUnits()

◆ convertToMapUnits()

◆ convertToPainterUnits()

◆ coordinateTransform()

◆ currentFrame()

◆ currentMaskId()

◆ customProperties()

◆ customRenderingFlags()

◆ deviceOutputSize()

◆ devicePixelRatio()

◆ disabledSymbolLayers()

◆ disabledSymbolLayersV2()

◆ distanceArea()

◆ dpiTarget()

◆ drawEditingInformation()

◆ elevationMap()

◆ expressionContext() [1/2]

◆ expressionContext() [2/2]

◆ extent()

◆ featureClipGeometry()

◆ featureFilterProvider()

◆ feedback()

◆ flags()

◆ forceVectorOutput()

◆ frameRate()

◆ fromMapSettings()

◆ fromQPainter()

◆ geometry()

◆ hasRenderedFeatureHandlers()

◆ imageFormat()

◆ isGuiPreview()

◆ isSymbolLayerEnabled()

◆ labelingEngine()

◆ labelSink()

◆ mapExtent()

◆ mapToPixel()

◆ maskIdProvider()

◆ maskPainter()

◆ maskSettings() [1/2]

◆ maskSettings() [2/2]

◆ operator=()

◆ outputSize()

◆ painter() [1/2]

◆ painter() [2/2]

◆ pathResolver()

◆ previewRenderPainter() [1/2]

◆ previewRenderPainter() [2/2]

◆ renderedFeatureHandlers()

◆ rendererScale()

◆ rendererUsage()

◆ renderingStopped()

◆ scaleFactor()

◆ segmentationTolerance()

◆ segmentationToleranceType()

◆ selectionColor()

◆ setCoordinateTransform()

◆ setCurrentFrame()

◆ setCurrentMaskId()

◆ setCustomProperty()

◆ setCustomRenderingFlag()

◆ setDevicePixelRatio()

◆ setDisabledSymbolLayers()

◆ setDisabledSymbolLayersV2()

◆ setDistanceArea()

◆ setDpiTarget()