Decorator class for Triangulations (s. More...

#include <TriDecorator.h>

Inheritance diagram for TriDecorator:

[legend]

Public Member Functions
	TriDecorator ()=default

	TriDecorator (QgsTriangulation *t)
	Constructor for TriDecorator with an existing triangulation.

void	addLine (const QVector< QgsPoint > &points, QgsInterpolator::SourceType lineType) override
	Adds a line (e.g.

int	addPoint (const QgsPoint &p) override
	Adds a point to the triangulation.

virtual void	addTriangulation (QgsTriangulation *t)
	Adds an association to a triangulation.

bool	calcNormal (double x, double y, QgsPoint &result) override
	Calculates the normal at a point on the surface and assigns it to 'result'.

bool	calcPoint (double x, double y, QgsPoint &result) override
	Calculates x-, y and z-value of the point on the surface and assigns it to 'result'.

void	eliminateHorizontalTriangles () override
	Eliminates the horizontal triangles by swapping.

int	oppositePoint (int p1, int p2) override
	Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge).

void	performConsistencyTest () override
	Performs a consistency check, remove this later.

QgsPoint *	point (int i) const override
	Returns a pointer to the point with number i.

bool	pointInside (double x, double y) override
	Returns `true`, if the point with coordinates x and y is inside the convex hull and `false` otherwise.

QList< int >	pointsAroundEdge (double x, double y) override
	Returns a value list with the numbers of the four points, which would be affected by an edge swap.

int	pointsCount () const override
	Returns the number of points.

void	ruppertRefinement () override
	Adds points to make the triangles better shaped (algorithm of ruppert)

void	setForcedCrossBehavior (QgsTriangulation::ForcedCrossBehavior b) override
	Draws the points, edges and the forced lines.

void	setTriangleInterpolator (TriangleInterpolator *interpolator) override
	Sets an interpolator object.

QList< int >	surroundingTriangles (int pointno) override
	Returns a value list with the information of the triangles surrounding (counterclockwise) a point.

bool	swapEdge (double x, double y) override
	Reads the content of a taff-file.

bool	triangleVertices (double x, double y, QgsPoint &p1, int &n1, QgsPoint &p2, int &n2, QgsPoint &p3, int &n3) override
	Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'.

bool	triangleVertices (double x, double y, QgsPoint &p1, QgsPoint &p2, QgsPoint &p3) override
	Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3.

double	xMax () const override
	Returns the largest x-coordinate value of the bounding box.

double	xMin () const override
	Returns the smallest x-coordinate value of the bounding box.

double	yMax () const override
	Returns the largest y-coordinate value of the bounding box.

double	yMin () const override
	Returns the smallest x-coordinate value of the bounding box.

Public Member Functions inherited from QgsTriangulation
virtual	~QgsTriangulation ()=default

virtual bool	saveTriangulation (QgsFeatureSink sink, QgsFeedback feedback=nullptr) const =0
	Saves the triangulation features to a feature sink.

virtual QgsMesh	triangulationToMesh (QgsFeedback *feedback=nullptr) const =0
	Returns a QgsMesh corresponding to the triangulation.

Protected Attributes
QgsTriangulation *	mTIN = nullptr
	Association with a Triangulation object.

Additional Inherited Members
Public Types inherited from QgsTriangulation
enum	ForcedCrossBehavior { SnappingTypeVertex , DeleteFirst , InsertVertex }
	Enumeration describing the behavior, if two forced lines cross. More...

Static Public Member Functions inherited from QgsTriangulation
static QgsFields	triangulationFields ()
	Returns the fields output by features when calling saveTriangulation().

Detailed Description

Decorator class for Triangulations (s.

Decorator pattern in Gamma et al.).

Note: Not available in Python bindings.

Definition at line 31 of file TriDecorator.h.

Constructor & Destructor Documentation

◆ TriDecorator() [1/2]

TriDecorator::TriDecorator ( )

default

◆ TriDecorator() [2/2]

TriDecorator::TriDecorator ( QgsTriangulation * t )

inlineexplicit

Constructor for TriDecorator with an existing triangulation.

Definition at line 70 of file TriDecorator.h.

Member Function Documentation

◆ addLine()

void TriDecorator::addLine	(	const QVector< QgsPoint > &	points,
		QgsInterpolator::SourceType	lineType
	)

overridevirtual

Adds a line (e.g.

a break-, structure- or an isoline) to the triangulation, by specifying a list of source points.

Implements QgsTriangulation.

Definition at line 20 of file TriDecorator.cpp.

◆ addPoint()

int TriDecorator::addPoint ( const QgsPoint & point )

overridevirtual

Adds a point to the triangulation.

The point should have a z-value matching the value to interpolate.

Implements QgsTriangulation.

Definition at line 32 of file TriDecorator.cpp.

◆ addTriangulation()

void TriDecorator::addTriangulation ( QgsTriangulation * t )

inlinevirtual

Adds an association to a triangulation.

Definition at line 76 of file TriDecorator.h.

◆ calcNormal()

bool TriDecorator::calcNormal	(	double	x,
		double	y,
		QgsPoint &	result
	)

overridevirtual

Calculates the normal at a point on the surface and assigns it to 'result'.

Returns: true in case of success and false in case of failure

Implements QgsTriangulation.

Definition at line 58 of file TriDecorator.cpp.

◆ calcPoint()

bool TriDecorator::calcPoint	(	double	x,
		double	y,
		QgsPoint &	result
	)

overridevirtual

Calculates x-, y and z-value of the point on the surface and assigns it to 'result'.

Returns true in case of success and false in case of failure

Implements QgsTriangulation.

Definition at line 72 of file TriDecorator.cpp.

◆ eliminateHorizontalTriangles()

void TriDecorator::eliminateHorizontalTriangles ( )

overridevirtual

Eliminates the horizontal triangles by swapping.

Implements QgsTriangulation.

Definition at line 246 of file TriDecorator.cpp.

◆ oppositePoint()

int TriDecorator::oppositePoint	(	int	p1,
		int	p2
	)

overridevirtual

Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge).

Returns -1 if point is a virtual point. Returns -10 if point crosses over edges.

Implements QgsTriangulation.

Definition at line 141 of file TriDecorator.cpp.

◆ performConsistencyTest()

void TriDecorator::performConsistencyTest ( )

overridevirtual

Performs a consistency check, remove this later.

Implements QgsTriangulation.

Definition at line 46 of file TriDecorator.cpp.

◆ point()

QgsPoint * TriDecorator::point ( int i ) const

overridevirtual

Returns a pointer to the point with number i.

Implements QgsTriangulation.

Definition at line 86 of file TriDecorator.cpp.

◆ pointInside()

bool TriDecorator::pointInside	(	double	x,
		double	y
	)

overridevirtual

Returns true, if the point with coordinates x and y is inside the convex hull and false otherwise.

Implements QgsTriangulation.

Definition at line 270 of file TriDecorator.cpp.

◆ pointsAroundEdge()

QList< int > TriDecorator::pointsAroundEdge	(	double	x,
		double	y
	)

overridevirtual

Returns a value list with the numbers of the four points, which would be affected by an edge swap.

This function is e.g. needed by NormVecDecorator to know the points, for which the normals have to be recalculated. The list has to be deleted by the code which calls this method

Implements QgsTriangulation.

Definition at line 298 of file TriDecorator.cpp.

◆ pointsCount()

int TriDecorator::pointsCount ( ) const

overridevirtual

Returns the number of points.

Implements QgsTriangulation.

Definition at line 128 of file TriDecorator.cpp.

◆ ruppertRefinement()

void TriDecorator::ruppertRefinement ( )

overridevirtual

Adds points to make the triangles better shaped (algorithm of ruppert)

Implements QgsTriangulation.

Definition at line 258 of file TriDecorator.cpp.

◆ setForcedCrossBehavior()

void TriDecorator::setForcedCrossBehavior ( QgsTriangulation::ForcedCrossBehavior b )

overridevirtual

Draws the points, edges and the forced lines.

Sets the behavior of the triangulation in case of crossing forced lines

Implements QgsTriangulation.

Definition at line 222 of file TriDecorator.cpp.

◆ setTriangleInterpolator()

void TriDecorator::setTriangleInterpolator ( TriangleInterpolator * interpolator )

overridevirtual

Sets an interpolator object.

Implements QgsTriangulation.

Definition at line 234 of file TriDecorator.cpp.

◆ surroundingTriangles()

QList< int > TriDecorator::surroundingTriangles ( int pointno )

overridevirtual

Returns a value list with the information of the triangles surrounding (counterclockwise) a point.

Four integer values describe a triangle, the first three are the number of the half edges of the triangle and the fourth is -10, if the third (and most counterclockwise) edge is a breakline, and -20 otherwise. Any virtual point needs to have the number -1

Implements QgsTriangulation.

Definition at line 155 of file TriDecorator.cpp.

◆ swapEdge()

bool TriDecorator::swapEdge	(	double	x,
		double	y
	)

overridevirtual

Reads the content of a taff-file.

Saves the content to a taff file Swaps the edge which is closest to the point with x and y coordinates (if this is possible)

Implements QgsTriangulation.

Definition at line 284 of file TriDecorator.cpp.

◆ triangleVertices() [1/2]

bool TriDecorator::triangleVertices	(	double	x,
		double	y,
		QgsPoint &	p1,
		int &	n1,
		QgsPoint &	p2,
		int &	n2,
		QgsPoint &	p3,
		int &	n3
	)

overridevirtual

Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'.

Implements QgsTriangulation.

Definition at line 100 of file TriDecorator.cpp.

◆ triangleVertices() [2/2]

bool TriDecorator::triangleVertices	(	double	x,
		double	y,
		QgsPoint &	p1,
		QgsPoint &	p2,
		QgsPoint &	p3
	)

overridevirtual

Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3.

Implements QgsTriangulation.

Definition at line 114 of file TriDecorator.cpp.

◆ xMax()

double TriDecorator::xMax ( ) const

overridevirtual

Returns the largest x-coordinate value of the bounding box.

Implements QgsTriangulation.

Definition at line 167 of file TriDecorator.cpp.

◆ xMin()

double TriDecorator::xMin ( ) const

overridevirtual

Returns the smallest x-coordinate value of the bounding box.

Implements QgsTriangulation.

Definition at line 181 of file TriDecorator.cpp.

◆ yMax()

double TriDecorator::yMax ( ) const

overridevirtual

Returns the largest y-coordinate value of the bounding box.

Implements QgsTriangulation.

Definition at line 194 of file TriDecorator.cpp.

◆ yMin()

double TriDecorator::yMin ( ) const

overridevirtual

Returns the smallest x-coordinate value of the bounding box.

Implements QgsTriangulation.

Definition at line 208 of file TriDecorator.cpp.

Member Data Documentation

◆ mTIN

QgsTriangulation* TriDecorator::mTIN = nullptr

protected

Association with a Triangulation object.

Definition at line 65 of file TriDecorator.h.

The documentation for this class was generated from the following files:

/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/analysis/interpolation/TriDecorator.h
/build/qgis-3.41.0+git20241119+45a0abf3bec+99sid/src/analysis/interpolation/TriDecorator.cpp

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ TriDecorator() [1/2]

◆ TriDecorator() [2/2]

Member Function Documentation

◆ addLine()

◆ addPoint()

◆ addTriangulation()

◆ calcNormal()

◆ calcPoint()

◆ eliminateHorizontalTriangles()

◆ oppositePoint()

◆ performConsistencyTest()

◆ point()

◆ pointInside()

◆ pointsAroundEdge()

◆ pointsCount()

◆ ruppertRefinement()

◆ setForcedCrossBehavior()

◆ setTriangleInterpolator()

◆ surroundingTriangles()

◆ swapEdge()

◆ triangleVertices() [1/2]

◆ triangleVertices() [2/2]

◆ xMax()

◆ xMin()

◆ yMax()

◆ yMin()

Member Data Documentation

◆ mTIN